High Performance Ball Valve

Stem sealing

High performance ball valve for long term operation

The self-adjustable stem sealing design provide long term operation to reduce the frequency of maintenance and sealing parts replacement. This deign is very suitable for the valve with automation, such as pneumatic or electric actuator for high cycle operation.  As the valve sealing over it’s wear compensation, the media will leak from windows around the valve neck. This initial leakage will help uses to replace a new valve or repair kits in advance. 

Zipson can also provide the products to meet ISO 15848 or TA-Luft fugitive emission requirement when require.  The emission bonnet can be an option for ultra critical condition for safety of human being or environment.

ISO 5211 direct mount ball valve

Direct mount for actuator/ gear operator or limit switch box

All Zipson’s high performance valves come with ISO 5211 direct mounting pad.  What customers need to figure out are the torque value, dimensions of ISO flange and stem. These ISO 5211 direct mount ball valves were designed for mounting actuators & gears conveniently. 

201D, 2-PC Ball Valve

Size: 1/4"~4"/ DN08-100

201D, 2-pc high performance ball valve, ISO direct mount
  • Body & end caps quality investment casting
  • ANSI B16.34 construction
  • ISO 5211 direct mounting pad
  • High performance self adjusted stem design for high cycle operation
  • Blow-out proof stem design
  • With locking device
  • Automation application (actuator/ limit switch box/ solenoid valve)
  • Spring return (dead-man) handle
  • Oval handle
  • Manual handle with limit switch box
  • Thermal isolation extended stem
  • Duplex, Super Duplex
  • Low torque design
  • Valves with Spring Return Handle (also called Dead-Man Handle) will return when user release the handle
  • For size 1/4” to 4” (100 Nm)
  • with locking function & lock nuts (anti-loose nuts)
  • Torque adjustable design
  • Zipson Patented!

Option of Low torque design is to reduce at least 30% of valve torque for choosing smaller size actuator to save cost for working pressure less than 600 psi

 

Stem extension (EB series bracket) is usually for thermal isolation. The ISO pad mount is convenient to mount the extended bonnet

302F, 3-PC Ball Valve

Size: 1/4"~6"/ DN08-150

302F, high performance 3-pc ball valve
  • Body & end caps quality investment casting
  • Swing-out design for easy replacement
  • ISO 5211 direct mounting pad
  • High performance self adjusted stem design
  • Blow-out proof stem design
  • Thread/ SW/ BW/ ISO 1127/ DIN 11850
  • Flange end ANSI150/ PN16/ JIS10K
  • With locking device
  • Automation application (actuator/ limit switch box/ solenoid valve)
  • V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot
  • PTFE/ TFM cavity filled seats
  • Flanged end to ANSI150/ PN16/ JIS10K
  • ISO 15848 and TA-Luft Fugitive emission certified
  • Various seat materials for different conditions
  • Manual handle with limit switch box
  • CF3M, Duplex, Super Duplex

302F can be with flange end of ANSI150, PN16, JIS 10K connection

302F, 3-pc flange ball valve

  • Valves with Spring Return Handle (also called Dead-Man Handle) will return when user release the handle
  • For size 1/4” to 4” (100 Nm)
  • with locking function & lock nuts (anti-loose nuts)
  • Torque adjustable design
  • Zipson Patented!

 

Cavity fillers help to keep from media deposit or get solid in the valve cavity by low temperature or dry. The solid substance filled in valve cavity will seize the ball to cause the problem in operation

V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot, easy to replace for required flow rate

 

Stem extension (EB series bracket) is usually for thermal isolation. The ISO pad mount is convenient to mount the extended bonnet

305D, 3-PC Ball Valve, 2000 PSI

Size: 1/4"~4"/ DN08-100

305D, 3-pc ball valve, high performance, 2000 psi
  • Body & end caps quality investment casting
  • ANSI B16.34 construction
  • 2160/ 2000 PSI, Class 900/ 800
  • CRN registered
  • Fire safe certified, with double seals
  • High performance self adjusted stem design
  • Blow-out proof stem design
  • Thread/ SW/ BW/ ISO 1127
  • Automation application (actuator/ limit switch box/ solenoid valve)
  • V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot
  • API 607 fire safe certified
  • ISO 15848 and TA-Luft Fugitive emission certified
  • Various seat materials for different conditions
  • Stem extension or fugitive emission bonnet
  • Manual handle with limit switch box
  • Alloy of Hastelloy C, Duplex, Super Duplex, 254 SMO
  • Double block and bleed valve (DBB)

 

Cavity fillers help to keep from media deposit or get solid in the valve cavity by low temperature or dry. The solid substance filled in valve cavity will seize the ball to cause the problem in operation

  • Metal seats are solution for high working temperature or abrasive flow media
  • Metal seated valve type: 305M

V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot, easy to replace for required flow rate

305F, 3-PC Flange Ball Valve, ANSI 600 & 900

Size: 1/2"~4"/ DN15-100

305F, 3-pc flange ball valve, ANSI 600 & 900
  • Body & end caps quality investment casting
  • ANSI B16.34 construction
  • ANSI Class 900/ 600
  • CRN registered
  • Fire safe certified, with double seals
  • High performance self adjusted stem design
  • Blow-out proof stem design
  • Automation application (actuator/ limit switch box/ solenoid valve)
  • V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot
  • API 607 fire safe certified
  • ISO 15848 and TA-Luft Fugitive emission certified
  • Various seat materials for different conditions
  • Stem extension or fugitive emission bonnet
  • Manual handle with limit switch box
  • Alloy of Hastelloy C, Duplex, Super Duplex, 254 SMO
  • Double block and bleed valve (DBB)

 

Cavity fillers help to keep from media deposit or get solid in the valve cavity by low temperature or dry. The solid substance filled in valve cavity will seize the ball to cause the problem in operation

  • Metal seats are solution for high working temperature or abrasive flow media
  • Metal seated valve type: 305M

V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot, easy to replace for required flow rate

306D, 3-PC Ball Valve, 3600/ 3000 PSI

Size: 1/4"~3"/ DN08-80

306D, 3-pc ball valve, 3000 psi
  • Body & end caps quality investment casting
  • ANSI B16.34 construction
  • 3600/ 3000 psi
  • Fire safe certified, with double seals
  • High performance self adjusted stem design
  • Blow-out proof stem design
  • Thread/ SW/ BW (Sch. 80)
  • Automation application (actuator/ limit switch box/ solenoid valve)
  • V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot
  • API 607 fire safe certified
  • ISO 15848 and TA-Luft Fugitive emission certified
  • Various seat materials for different conditions
  • Stem extension or fugitive emission bonnet
  • Manual handle with limit switch box
  • Alloy of Hastelloy C, Duplex, Super Duplex, 254 SMO
  • Metal seats are solution for high working temperature or abrasive flow media
  • Metal seated valve type: 305M

V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot, easy to replace for required flow rate

306F, 3-PC Ball Valve, ANSI1500

Size: 1/2"~3"/ DN15-80

3-pc flange ball valve, ANSI1500
  • Body & end caps quality investment casting
  • ANSI B16.34 construction
  • ANSI Class 1500
  • Fire safe certified, with double seals
  • High performance self adjusted stem design
  • Blow-out proof stem design
  • Automation application (actuator/ limit switch box/ solenoid valve)
  • V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot
  • API 607 fire safe certified
  • ISO 15848 and TA-Luft Fugitive emission certified
  • Various seat materials for different conditions
  • Stem extension or fugitive emission bonnet
  • Manual handle with limit switch box
  • Alloy of Hastelloy C, Duplex, Super Duplex, 254 SMO
  • Metal seats are solution for high working temperature or abrasive flow media
  • Metal seated valve type: 305M

V-notch ball for 15°/ 30°/ 45°/ 60°/ 90°/ slot, easy to replace for required flow rate